WOS

Permanent URI for this collectionhttps://hdl.handle.net/11443/932

Browse

Author: search.filters.author.Kaya, IbrahimHas files: Yes

Search Results

Now showing 1 - 2 of 2
  • Thumbnail Image
    Item
    Comparison of fixation techniques in Vancouver type AG periprosthetic femoral fracture: a biomechanical study
    (TURKISH ASSOC ORTHOPAEDICS TRAUMATOLOGY, 2016-01-01) Sariyilmaz, Kerim; Korkmaz, Murat; Ozkunt, Okan; Gemalmaz, Hall Can; Sunguill, Mustafa; Baydogan, Murat; Kaya, Ibrahim; Okla, Fatih
    Objective: The purpose of this study was to biomechanically compare cable, trochanteric grip plate, and locking plate techniques in Vancouver type AG fracture model in an in vitro test environment. Methods: Fifteen pieces of fourth-generation synthetic femora were separated into 3 groups of 5 models each. A greater trochanteric fracture model was created after femoral stem implantation. Group 1 was fixated with only cable, Group 2 with trochanteric grip plate, and Group 3 with locking plate. Horizontal stiffness, axial stiffness, and failure loads were compared between the groups. Results: In horizontal compression tests, Group 3 had the highest values, but the only statistically significant difference was between the locking plate group and cable group. Axial distraction test results showed that mean stiffness of Group 1 was 94.6 +/- 9.44 N/mm, that of Group 2 was 174.8 +/- 28.64 N/mm, and that of Group 3 was 185.6 +/- 71.64 N/mm. While locking plate versus cable fixation and grip plate fixation versus cable fixation showed statistically significant differences (p<0.05), comparison of locking plate versus grip plate fixation showed no statistically significant difference (p>0.05). In axial failure load test, Group 3 had the highest results. The only significant difference was between the locking plate and cable groups (p<0.05). Conclusion: In Vancouver type AG fractures stable fixation may be achieved with grip plate fixation and locking plates, with the former ensuring more stable osteosynthesis.
  • Thumbnail Image
    Item
    Postoperative mechanical alignment analysis of total knee replacement patients operated with 3D printed patient specific instruments: A Prospective Cohort Study
    (TURKISH ASSOC ORTHOPAEDICS TRAUMATOLOGY, 2019-01-01) Gemalmaz, Halil Can; Sariyilmaz, Kerim; Ozkunt, Okan; Sungur, Mustafa; Kaya, Ibrahim; Dikici, Fatih
    Objective: Total knee replacement (TKR) is a surgical treatment for final stage gonarthrosis. The lifespan of the prosthetic implants used in TKR surgery is a major interest for the orthopaedic research community. Previously, proper implant alignment of the implants has been advocated for longevity of the TKR surgery. Recently, patient-specific (PSI) instruments have been proposed to improve the mechanical alignment of the TKR by permitting better implant positioning over conventional TKR surgery. The aim of this study is to compare the mechanical alignment results of patients operated with PSIs and conventional instruments. Methods: Two groups of 20 patients chosen in a quasi-random manner have been compared in this study. In the first group femoral distal and tibial osteotomies were made by a PSI which was produced by the patients' computed tomography scans. All osteotomies in the control group were made with the TKR set's routine instruments by conventional means. Patients' preoperative and postoperative mechanical femorotibal angles (mFTA), femoral coronal angles (FCA), tibial coronal angles (TCA) were measured and the number of outliers which showed more than 3 degrees of malalignment were counted in both groups for comparison. Results: The average postoperative mFTA was found to be 2.09 degrees for the PSI group and in was found to be 2.84 degrees for the control which was not statistically significant. The comparison of postoperative FCA and TCA also did not show significant difference between the groups. The number of outliers showing more than 3 degrees of malalignment per group were found to be 1 out of 20 (5\%) for the PSI group and 7 out of 20 (35\%) for the control which was statistically significant. Conclusion: In this study patient-specific instrumentation provided significantly better mechanical alignment compared to conventional TKR for the frequency of outlier cases with malalignment beyond 3 degrees. PSI proved no significant difference when the groups were compared for mFTA, FCA and TCA. Our findings support that PSI may improve TKR alignment by improving the ratio of the outlier patients with marked malalignment. (C) 2019 Turkish Association of Orthopaedics and Traumatology. Publishing services by Elsevier B.V.